3D Printing

The term ‘3D printing’ refers to a series of computer-controlled additive manufacturing techniques, all of which involve material being joined together to create a three-dimensional object. The types of files that can be 3D printed include 3D models obtained via 3D scanning methods. One of the main advantages of 3D printing techniques over CNC milling is that it enables the re-materialisation of objects with complex geometries as well as very fine surface relief. Factum Foundation employs a number of 3D printing techniques as part of the process of creating a piece or reproducing a work of art.

Fused Filament Fabrication (FFF) is the most common process, and typically most accessible, due to its low material costs and the comparatively rudimentary machines. Within Factum, the process is used to produce lower resolution maquettes, mould forms and mechanical parts such as component housings. In-house machines with build volumes of up to 500 mm3 can be used to fabricate 3D models in a single piece or to produce multiple pieces that are later joined to create a final, larger form.

The maquette for Michael Hansmeyer’s opera set for The Magic Flute, printed at Factum Arte at 1:20 scale using FFF technology © Factum Arte

Michael Hansmeyer’s opera set for The Magic Flute presented at the Théâtre Royal de La Monnaie de Munt in Brussels © Michael Hansmeyer

 


We use stereolithography 3D printing (also referred to as SLA or ‘resin printing’), for example, to print complex three-dimensional objects. In SLA printing, a 3D object is built up in layers of between 25 and 100 microns through the action of a UV laser, which converts the ultraviolet-sensitive resin in the printer vat into a solid. SLA is the most common type of 3D printing at Factum, used to produce anything from small-scale maquettes fabricated in-house, to larger models that are prepared in-house and sent out for production with one of our suppliers. SLA has allowed us to print larger objects than are possible with other 3D printing technologies: through our industry partners we are able to produce parts up to 2100mm x 700mm x 800mm in a single piece whilst maintaining excellent surface resolution. This makes SLA the perfect method for highly detailed smaller models where surface texture is important.

Due to their susceptibility to degradation from UV light, SLA 3D prints, unless used for reference, are rematerialised. Objects that have to be cast in metal can be either moulded in silicone and recreated in wax, or cast directly using a burnout and centrifugal casting process.

 

Shehzad Dawood’s Whale, produced in an edition of 10 + 1AP, was printed on an SLA machine, moulded and cast – digital 3D model © Oak Taylor Smith for Factum Arte

SLA print of Shehzad Dawood’s Whale © Oak Taylor Smith for Factum Arte

SLA printing the Cellini Bell – the Cellini Bell suspended in the resin vat © Oak Taylor Smith for Factum Arte

Quinner Baird from Factum Arte removes the print from the 3D printer © Oak Taylor Smith for Factum Arte

The print must be cured in acetone before it can be handled © Oak Taylor Smith for Factum Arte

The SLA print reproduces in great detail the complex geometries on the surface of the Cellini Bell © Oak Taylor Smith for Factum Arte




MSLA printing process © Oak Taylor Smith for Factum Arte

We also have in house, large scale MSLA printing. Similar to SLA, this technology instead uses an array of ultraviolet LED´s together with an LCD screen which masks what light is passing through to the ultraviolet-sensitive resin. This process is quick to materialise large objects as all information in each layer is cured simultaneously, as it is not dependent on the level of detail or amount of information in each layer of the object.

Selective Laser Sintering (SLS) uses a laser to sinter – which means to solidify by means of heat – fine particles of powdered material in the areas defined by the 3D model, constructing the form layer by layer and leaving the finished object suspended in the surrounding unsintered powder. SLS is an ideal process for end-use parts such as the busts created by the Veronica 3D Scanner, where the powder surface texture effectively represents that of human skin. SLS parts are generally more stable and resistant against UV light and are therefore often used as mechanical components in both prototyping and end use applications.

Factum also closely collaborates with Canon Production Printing (previously Océ – A Canon Company), using their Elevated Printing Technology to produce 3D prints of the fine surface texture of paintings and other 2.5D objects. CPP elevated printers are similar to the flat-bed printers used to print images. However, in this case, layer upon layer of ink is deposited onto a surface to produce high-resolution three-dimensional surfaces.

Since 2021, Factum has brought the collaboration with Canon Production Printing to the next level with the installation of an elevated printing system in the Madrid workshops.

Installing the elevated printing system in Factum’s workshops © Oak Taylor Smith for Factum Arte

Printing Rembrandt’s Portrait of an Old Man using Elevated Printing Technology © Óscar Parasiego for Factum Foundation and Canon Production Printing

Printing Rembrandt’s Portrait of an Old Man using Elevated Printing Technology © Óscar Parasiego for Factum Foundation and Canon Production Printing

Printing Rembrandt’s Portrait of an Old Man using Elevated Printing Technology © Óscar Parasiego for Factum Foundation and Canon Production Printing

Printing Rembrandt’s Portrait of an Old Man using Elevated Printing Technology © Óscar Parasiego for Factum Foundation and Canon Production Printing

Close-up of 3D colour print of Rembrandt’s Portrait of an Old Man produced using Elevated Printing Technology © Óscar Parasiego for Factum Foundation and Canon Production Printing

Installing the elevated printing system in Factum’s workshops © Oak Taylor Smith for Factum Arte

All 3D prints produced by Factum Arte and Factum Foundation undergo a process of physical mediation in order to take on the material qualities of the object being reproduced – the 3D print of the Cellini Bell (see images below), for example, was painted with a ceramic glaze prior to gilding.

Facsimile of the Cellini Bell – the 3D print was painted in ceramic glaze and gilded © Oak Taylor Smith for Factum Arte